I. Key points in the construction of the logistics center project
The construction of medical logistics center project mainly includes two parts of construction engineering and logistics equipment, which complement each other and are closely combined.Under normal circumstances, the construction project of logistics center has the characteristics of strong professionalism, long cycle, large investment and high complexity. Combined with the characteristics of medical logistics center, let's understand what factors should be considered in the medical logistics center in the architectural design stage.
First, the architectural design should pay attention to the thermal insulation performance

The safe storage of drugs is very key in the whole circulation link, which is also the focus of the drug administration department at present.In order to achieve a good storage temperature, whether for new or renovation projects, the insulation performance verification will be carried out at the beginning of the project construction.At present, large medical logistics centers basically use central air conditioning for temperature and humidity adjustment, and the summer peak monthly electricity bill is up to tens of thousands of yuan.The energy consumption of air conditioning, on the one hand, depends on the old and new degree of the equipment and the intelligent frequency conversion control, but most of it depends on the insulation of the building itself.
In general, the pharmaceutical logistics center should focus on the thermal insulation performance of the building in the design and planning:
1. Building orientation: this is a relatively key problem, which can obtain greater results with less investment.Simply put, in the south, consider the summer sun and ventilation, in the north, consider the winter wind and northwest wind.In particular, the logistics centers in northeast China should be set up with closed platforms to reduce the temperature loss caused by the loading and unloading process.In addition, the loading and unloading platform in the buffer zone can also be used as a thermal insulation parking area for vehicles at night.

2. Crace, canopy and gate: Consider whether the business attributes of pharmaceutical enterprises need to operate frequently in and leaving the warehouse, so the platform area should be considered closed operation as far as possible if conditions permit, so as to form a stable buffer zone and effectively reduce the temperature loss.From the architectural form, the platform is usually divided into the external platform and the built-in platform, the internal platform of the thermal insulation performance is better than the external platform.The cold storage area should generally be equipped with an independent platform, in order to prevent the temperature chain breaking, the seamless connection with the cold storage door should be set up, the cold storage door should be set up with inflatable door seal.In order to ensure the temperature, the warehouse door usually chooses a better sealed sliding door or lifting door, on the inside of the platform door configuration wind curtain machine, and it is best to linkage with the door, to reduce energy consumption.If it is a leased logistics warehouse, under the condition of limited transformation, a transparent and fast lifting door can be added on the inside of the door.The canopy height is required to have more than 4.5 meters of clearance, should not be too high, the width of the canopy should be as wide as possible, has covered the vehicle normal loading and unloading operation is appropriate.

Two, the building facade design should be fully considered to avoid light
Ordinary logistics centers generally do not have strict temperature control requirements, the facade design Windows are beautiful and can provide partial lighting.Drugs have the requirement of light avoidance storage, so the facade of pharmaceutical logistics center buildings should usually reduce the number of external Windows designed or do not design Windows.If the facade of the building internal function is used as an office rather than for storage drugs except, individual projects in order to beautiful and consider the light can use false window design, if it is a rental logistics warehouse, can be used in the internal light shade, if it is the roof transparent daylighting belt, suggest light insulation closed.

Third, the architectural design should achieve the maximum requirements of the plane space
Due to the temperature, humidity, strong and weak electricity and other related requirements, the pharmaceutical logistics center compared with other industry logistics center building unit area cost is higher, so the space utilization rate is more important.There are many factors affecting the space utilization rate of the medical logistics center, among which the setting of the column network is particularly critical.Different column networks can affect the space utilization rate of more than 30%.A pharmaceutical logistics center may adopt a variety of storage technologies, such as automatic three-dimensional warehouse, elevated warehouse, plane warehouse, attic and partition shelves, etc. Different storage technologies and different equipment require different column network are different, which is also one of the difficulties in the construction and design of medical logistics engineering.Sometimes, in order to compare the advantages of various column networks, the selection analysis of different devices is also needed.For example, when choosing an elevated warehouse, the requirements of forward forklift truck, counterbalance forklift truck and narrow lane forklift truck for column network are completely different.
Since pharmaceutical warehouses are generally equipped with cold storage, the stable supply of power should be particularly considered, because once the power failure, it will lead to drug failure in the cold storage, causing huge losses to enterprises. Therefore, we must first confirm whether to double power supply before the location of the project.If it cannot be met, the power supply mode of "single power supply + generator set" can be considered to ensure that the power consumption of the drug warehouse is not affected.