Trlet shelves are one of the more common types in enterprise warehouses today. If you want to deeply understand the bearing gravity of the shelf, you must know the height and depth ratio of the shelf, which is applicable for any type of shelf. Trlet shelves are the most frequently used of all shelf types and are particularly effective, so how do we know its weight when custom tray shelves?
I. The height and depth ratio defined by the Shelf Manufacturers Association is at 6:1. The height and depth ratio of a single row shelf is the depth ratio from the floor to the top beam level into the frame, e. g., the height of the ring beam is 180 inches (15), and the depth is 42 inches (3'6 "). Determine the depth ratio of the height, 180 divided by 42=4.28. 4.28 to 1 is considered in the standard range, and normal anchors for non-seismic applications.

2. When the height depth ratio of the tray shelf exceeds 6:1, you need to use special base plates and some overhead relationships. Of course, enough space and reservations for the loading and unloading areas are also crucial. Therefore, considering the design of warehouse shelves, the products must be handled, classification, label, turning radius of forklift, although many enterprises will be faced with the problem of insufficient space use, but we must try to achieve enough distance between a single row of shelves and shelves. Otherwise it would cause confusion in goods.
3. When all the space can be designed and reserved, then how much goods can the tray shelf hold? This requires us to understand the following questions:

 1. Understand the specifications and weight of their own products. The weight of the tray shelf is limited, and the load-bearing goods on each tray should be stored according to the specified weight;
 2. Bearing capacity of shelf beam: the capacity of beam beam is based on the beam under the uniform load of each pair.
  3. Weight bearing capacity of the shelf line deck: the deck capacity gives the average cloth load grade. The screen where the deck is fixed will not be directly or point mounted. Steel laminate prevents goods from falling.

 4. Column bearing capacity of shelves: the capacity of column is based on horizontal beam spacing. The stand is its weakest link, so the capability is the largest frame based on the support column area. The capability standard frame is based on the 48 " top beam spacing.
Only the real implementation of the above mentioned some warehouse shelf knowledge points, in order to clearly know the bearing gravity of the shelf. Only all the warehousing management work can be carried out in a safe and orderly manner.