Beam shelves are safe and convenient, suitable for various warehouses, direct access to goods.It is the most common shelf type in the enterprise warehouse today, which can make full use of the space.Using the tray access method, effectively cooperate with the forklift loading and unloading, greatly improve the operation efficiency.Mechanical equipment requirements: reverse counterbalance forklift or reactor machine.The acker can improve the ground space utilization rate by 30% with an operating height of more than 16 meters.

The beam shelf is the most professional shelf using pallets to store goods. It has the advantages of simple structure, large carrying capacity and large safety factor.According to the use situation, pallet load requirements, pallet size, the actual lift height of the forklift, customized shelves of different specifications, then what specifications and parameters should the crossbeam pallet shelves know when customized?
I. Main and auxiliary frame:
The 1, main frame consists of columns and beams on both sides and can be completely independent of a set of shelves.
The 2, secondary frame were columns attached to an adjacent set of shelves that could not be used alone;
II. Specification parameters of beam shelves:
1, length (L) refers to the lateral span of the shelf and can be divided into inner diameter, outer diameter and central distance;
The 2, inner diameter is the length from the interior of one column to the interior of another;
The 3, outer diameter is the total length of the main frame;
The 4, center distance is the length of from the midpoint of one column to the other midpoint;

4, width (W), depth (D) refers to the total distance of the continental shelf;
The 6, height (H) refers to the total height of the shelf;
7, maximum carrying capacity per unit shelf.
III. Specification for materials for beam shelves:
1, column: section length * section width * section thickness;
2, beam: section length * section width * section thickness, rectangular tube.
3, P pipe, Welding beam;
4, laminate: reinforced laminate means reinforcement bottom will be welded.

IV. Design of beam-type shelf length:
1, To understand the specification of the tray, if the goods exceed the tray, it should be calculated by the size of the tray.
The 2, is generally designed with two discs per layer, and the interval between tray and tray is 70 to 100mm, lower layer can be 70mm.If the trays are as small as 800mm long, consider placing three trays on each floor.
V. Calculation formula: L= tray length * 2 quantity 70-100 * 3 interval.